EZ
Stairs is an
adjustable, heavy duty steel stair bracket system, which
allows you to make automatic adjustments to form any rise
or run you require. You only need two stringers for deck
stairs up to 7’ in width and 9' in width for interior
stairs. No center stringers are needed at all because riser
acts as a load-bearing joist, giving you strong stairs. Most
of the saw cuts are eliminated and require only three to
four cuts per stringer.
These
EZ Stairs brackets not only adjust, but are also approved
as ‘joist hangers’. This allows you to attach
2” thick risers that span across the stair like floor
joists, every 10” or 11” between the two stringers.
This eliminates the need for several center stringers running
down the stair as in conventional construction. Since there
are only two stringers, you also eliminate the need to
align and attach several cut stringers in order to build
your stair.
The
brackets also provide ‘code compliant’ rail
post support. According to their accredited testing, the
brackets are used to provide rail post support for any
type of wood stair which meets the code requirement for
200lb. Lateral load at 42”. This has never been achieved
on any wood stairs system.
This
stair building system is much simpler and faster than conventional
stair building, without sacrificing structural integrity
or strength. The stairs turn out so well made that you
won’t
even hear a squeak. They can be used for deck stairs, concrete
formwork and interior stairs: basement stairs, tongue and
groove stairs.
How It Works: |
